Three Lanes. One Glance.
Arcview's curved panoramic mirror clips over your factory mirror and widens your rear view up to 3x, so the cars beside you stop hiding in the frame.
Fits over your existing mirror in under 2 minutes — no tools, no drilling.
A wider field of view
See both lanes, not just one.
Fewer blind spots
Sideswipes happen in the gap your mirror can't show.
No drilling, no tools
Clips over your factory mirror in minutes.
Fits nearly every vehicle
Sedans, SUVs, pickups, vans, and more.
Your factory mirror was never wide enough
Standard mirrors frame a narrow slice of the lane behind you. Cars merging from the side often sit exactly where that frame ends — invisible until you turn your head. Arcview's curved glass pulls both adjacent lanes into the same reflection, so a shoulder-check confirms what you already saw, instead of catching what you missed.
On in under two minutes
No tools, no drilling, nothing permanent.
Clip the mount
Attach the adjustable buckle to the back edge of your factory mirror.
Set the width
Pull the extendable clip out to match your mirror's frame, from 2.5" to 3.6".
Angle it in
Tilt the panoramic glass until the full rear window sits inside the frame.
Drive
Nothing is glued or screwed down, so you can remove it just as easily.
Two hooks, one secure fit
A grip that stays put
A spring-loaded upper hook and a locking lower hook clamp onto the top and bottom edge of your factory mirror housing — nowhere near the glass, so there's no risk of scratching it.
Built to extend
The mount extends from 2.5" to 3.6", which is wide enough for the vast majority of factory mirrors on sedans, SUVs, trucks, and vans.
Built for what you actually drive
The clip mount fits factory mirrors between 2.5" and 3.6" tall, which covers the large majority of passenger vehicles. If you drive something unusual — a classic car or a heavy-duty truck, for example — measure your mirror's height before ordering.
Distortion-free glass, not a fun-house mirror
-
Edge-to-edge curved glass
Ground for a smooth, continuous curve so the image stays sharp at the edges instead of blurring like a cheap convex mirror.
-
Anti-glare coating
Softens oncoming headlights at night instead of bouncing them straight back at you.
-
Shatter-resistant frame
A reinforced housing that holds its shape and angle, even on rough roads.
-
Weatherproof
Built to handle a parked car's temperature swings without warping or clouding.
What drivers notice first
I stopped doing the little head-swivel every time I changed lanes. I can just see the car that used to disappear in my mirror.
Priya S. — sedan driver
Took me about ninety seconds to put on, and I could immediately see both lanes behind my minivan instead of just the middle one.
Marcus T. — minivan driver
My pickup has a short cab and a lot of blind spot. This mirror actually closed the gap.
Dana R. — pickup driver
Common questions
Arcview's mount extends from 2.5" to 3.6" and clips over the top and bottom edge of your factory mirror, which covers the large majority of sedans, SUVs, pickups, vans, and minivans. If your factory mirror is unusually large or small, measure its height before ordering.
No — it clips directly over your existing mirror in seconds and can be removed just as easily. Nothing is glued, drilled, or permanently attached.
Like any wide-angle mirror, the panoramic glass shows a broader area, which means objects appear slightly smaller than in a flat mirror. Most drivers adjust to the new field of view within their first few trips.
The glass carries an anti-glare coating designed to soften oncoming headlights, but as with any wide mirror, give yourself a few night drives to get used to the wider reflection before relying on it in heavy traffic.
Most drivers finish in under two minutes, with no tools required.
We offer 30-day returns if it doesn't fit or isn't right for your vehicle.
Stop guessing what's beside you
Cash on Delivery Available. 07-day Returns. If it doesn't fit, send it back.
